RFT-LED
Upgrade existing troffer fixtures quickly and efficiently with RAB DESIGN’s RFT Retrofit Troffer, designed for fast installation, exceptional energy savings, and superior lighting performance. The RFT offers a simple and cost-effective solution for modernizing outdated fluorescent fixtures. Delivering up to 145 LM/W, the RFT maximizes energy efficiency while providing bright, uniform illumination. Ideal for offices, schools, healthcare facilities, and commercial spaces. Available in multiple sizes and wattage options.
Features:
- Fits most existing troffers, making it easy to modernize outdated fluorescent fixtures without the cost and hassle of a full fixture replacement.
- Keep the existing housing, avoid working around HVAC, and reduce waste while upgrading to efficient LED performance.
- Simple-to-install:
- Remove old fluorescent tubes and ballast.
- Attach side brackets to the housing.
- Hang the retrofit troffer and complete the wiring.
- Close and latch the door to complete installation.
- Available in Three Sizes: Offered in 1×4, 2×2, and 2×4 configurations.
Specifications
| Size | 1'x4' |
| Light Output | 5800/4350/2900 lm |
| Efficacy | 145 lm/W |
| CCT | 3500K/4000K/5000K (CCT Selectable) |
| Beam Angle | 120° |
| LED Lifetime (L80) | >100,000 Hrs |
| CRI | 86 |
| Wattage | 40/30/20W |
| Voltage | 120-347 V |
| Surge Protection | 2kV (Built-in Driver) as per IEC/EN61000-4-5 |
| Power Factor | ≥0.9 |
| THD | <15% |
| Housing | Powder Coated Steel Back Housing |
| Finish | White |
| Lens | Frosted Polycarbonate |
| Ambient Operating Temperature | -20°C to 40°C (-4°F to 104°F) |
| Mounting | Recessed in T-bar grid ceiling using existing housing & provided safety cables |
| Certifications | cULus Listed for Canada, per CSA C22.2 No. 250.0, DLC Standard |
| Dimming | 0-10V (0-100% Dimming, Dim to Off) |
| Sensor | Microwave Motion Sensor (RC-100 remote is needed to change default settings) |
