Cast Aluminum housing with f1 rated UV resistant clear/frosted lens. Spun aluminum reflector for widespread, even illumination. Designed to protect fixture from insect and water ingress.
Driver has Short Circuit & Open Circuit Protection and temperature foldback. Temperature foldback circuit reduces the output current to ensure that the LED temperature does not exceed the set value, protecting the LED from failure. Driver complies with UL8750, Class 2 output. Electromagnetic Compliance – FCC Title 47 Part 15 Class A.
Available in T3, T4 or T5 beam distributions. Optics are rated IP66.
Mounts a 2-3/8” to 3” OD vertical tenon. Custom pole adaptor options available. Fixture can also be wall mounted through a Decorative Wall Mount bracket sold separately.
Tool free opening of the top of the fixture to access lumen adjustable switch, maintenance purpose.
Corrosion resistant polyester powder paint. Sandtex Black is standard. Custom Colors available.
Lumen Adjustable Option
A rotary switch for lumen adjustment is a factory installed option. To access the switch, Installer needs to open the top of the fixture.
|Replaces Up To||150W MH|
|CCT||5000K*, 4000K*, 3000K*|
|Operating Temp||-40°C to +40°C|
|Beam Pattern||T5, T4, T3|
|Standard Lens||f1 Rated UV resistant Clear/Frosted Polycarbonate Lens|
|Finish Options||Sandtex Black, Custom Colours|
|Installed Options||Lumen Adjustment Switch, Photocell, NEMA 3/7 PIN Receptacle, Frosted Lens, 90/180° House Side Cut Off Options (not DLC listed), 10 kV Surge Protection|
|Additional Options||Decorative Wall Mount Arm, Pole Adaptors|
|Mounting Options||3” Post Top Mount, Wall Mount with decorative arm|
|Tenon Required for Mounting||3"|
|Certification||cULus, DLC Standard, Approved for Wet Locations, IP 66 UL 1598|